# This file was automatically generated by SWIG (http://www.swig.org).
# Version 3.0.8
#
# Do not make changes to this file unless you know what you are doing--modify
# the SWIG interface file instead.
from sys import version_info
if version_info >= (2, 6, 0):
def swig_import_helper():
from os.path import dirname
import imp
fp = None
try:
fp, pathname, description = imp.find_module('_pyupm_grovewfs', [dirname(__file__)])
except ImportError:
import _pyupm_grovewfs
return _pyupm_grovewfs
if fp is not None:
try:
_mod = imp.load_module('_pyupm_grovewfs', fp, pathname, description)
finally:
fp.close()
return _mod
_pyupm_grovewfs = swig_import_helper()
del swig_import_helper
else:
import _pyupm_grovewfs
del version_info
try:
_swig_property = property
except NameError:
pass # Python < 2.2 doesn't have 'property'.
def _swig_setattr_nondynamic(self, class_type, name, value, static=1):
if (name == "thisown"):
return self.this.own(value)
if (name == "this"):
if type(value).__name__ == 'SwigPyObject':
self.__dict__[name] = value
return
method = class_type.__swig_setmethods__.get(name, None)
if method:
return method(self, value)
if (not static):
if _newclass:
object.__setattr__(self, name, value)
else:
self.__dict__[name] = value
else:
raise AttributeError("You cannot add attributes to %s" % self)
def _swig_setattr(self, class_type, name, value):
return _swig_setattr_nondynamic(self, class_type, name, value, 0)
def _swig_getattr_nondynamic(self, class_type, name, static=1):
if (name == "thisown"):
return self.this.own()
method = class_type.__swig_getmethods__.get(name, None)
if method:
return method(self)
if (not static):
return object.__getattr__(self, name)
else:
raise AttributeError(name)
def _swig_getattr(self, class_type, name):
return _swig_getattr_nondynamic(self, class_type, name, 0)
def _swig_repr(self):
try:
strthis = "proxy of " + self.this.__repr__()
except Exception:
strthis = ""
return "<%s.%s; %s >" % (self.__class__.__module__, self.__class__.__name__, strthis,)
try:
_object = object
_newclass = 1
except AttributeError:
class _object:
pass
_newclass = 0
def getVersion():
return _pyupm_grovewfs.getVersion()
getVersion = _pyupm_grovewfs.getVersion
[docs]class GroveWFS(_object):
"""
API for the Grove Water Flow Sensor.
Deprecated This class is being replaced by WFS
ID: grovewfs
Name: Water Flow Sensor
Category: liquid
Manufacturer: seeed
Link:http://wiki.seeedstudio.com/wiki/G1/2_Water_Flow_sensor
Connection: gpio
Kit: eak This sensor is used to measure water flow in liters per
minute (LPM). It incorporates a Hall Effect sensor. The UPM module
defines an interrupt routine to be triggered on each low pulse,
keeping count. This device requires a 10K pull-up resistor for the
signal line (yellow wire). There is a schematic diagram on the
SeeedStudio site
(3/2015):http://www.seeedstudio.com/wiki/index.php?title=G1/2_Water_Flow_sensor
However, be careful when wiring this up - the schematic appears to
have a bug in it: the lower left connection of the signal line
(yellow) to Vcc (red) should not be there. The sensor can work with
this connection, but probably not for very long.
C++ includes: grovewfs.hpp
"""
__swig_setmethods__ = {}
__setattr__ = lambda self, name, value: _swig_setattr(self, GroveWFS, name, value)
__swig_getmethods__ = {}
__getattr__ = lambda self, name: _swig_getattr(self, GroveWFS, name)
__repr__ = _swig_repr
def __init__(self, pin):
"""
GroveWFS(int pin)
Grove Water Flow sensor constructor
Parameters:
-----------
pin: Digital pin to use
"""
this = _pyupm_grovewfs.new_GroveWFS(pin)
try:
self.this.append(this)
except Exception:
self.this = this
__swig_destroy__ = _pyupm_grovewfs.delete_GroveWFS
__del__ = lambda self: None
[docs] def getMillis(self):
"""
uint32_t getMillis()
Returns the number of milliseconds elapsed since initClock() was last
called.
Elapsed milliseconds
"""
return _pyupm_grovewfs.GroveWFS_getMillis(self)
[docs] def initClock(self):
"""
void initClock()
Resets the clock
"""
return _pyupm_grovewfs.GroveWFS_initClock(self)
[docs] def clearFlowCounter(self):
"""
void
clearFlowCounter()
Resets the flow counter to 0. The flow counter should be stopped via
stopFlowCounter() prior to calling this function.
"""
return _pyupm_grovewfs.GroveWFS_clearFlowCounter(self)
[docs] def startFlowCounter(self):
"""
void
startFlowCounter()
Starts the flow counter
"""
return _pyupm_grovewfs.GroveWFS_startFlowCounter(self)
[docs] def stopFlowCounter(self):
"""
void
stopFlowCounter()
Stops the flow counter
"""
return _pyupm_grovewfs.GroveWFS_stopFlowCounter(self)
[docs] def flowCounter(self):
"""
uint32_t
flowCounter()
Gets the flow counter
Flow counter
"""
return _pyupm_grovewfs.GroveWFS_flowCounter(self)
[docs] def flowRate(self):
"""
float flowRate()
Computes the flow rate in liters per minute (LPM)
Computed flow rate
"""
return _pyupm_grovewfs.GroveWFS_flowRate(self)
GroveWFS_swigregister = _pyupm_grovewfs.GroveWFS_swigregister
GroveWFS_swigregister(GroveWFS)
# This file is compatible with both classic and new-style classes.