MPR121 Class Reference

API for the MPR121 I2C Touch Sensor. More...

Detailed Description

• ID: mpr121
• Name: MPR121 Touch Sensor
• Other Names: Grove I2C Touch Sensor
• Category: touch
• Manufacturer: seeed
• Link: http://www.seeedstudio.com/wiki/Grove_-_I2C_Touch_Sensor
• Connection: i2c
• Kit: tsk

UPM module for the MPR121 touch sensor

  // Instantiate an MPR121 on I2C bus 0

  upm::MPR121 *touch = new upm::MPR121(MPR121_I2C_BUS, MPR121_DEFAULT_I2C_ADDR);

  // init according to AN3944 defaults
  touch->configAN3944();

  while (shouldRun)
    {
      touch->readButtons();
      printButtons(touch);
      sleep(1);
    }

Public Member Functions
	MPR121 (int bus, uint8_t address=MPR121_DEFAULT_I2C_ADDR)
bool	configAN3944 ()
void	readButtons ()
mraa::Result	writeBytes (uint8_t reg, uint8_t *buffer, int len)
int	readBytes (uint8_t reg, uint8_t *buffer, int len)

Data Fields
uint16_t	m_buttonStates
bool	m_overCurrentFault

Constructor & Destructor Documentation

MPR121	(	int	bus,
		uint8_t	address = MPR121_DEFAULT_I2C_ADDR
	)

MPR121 constructor

Parameters

bus	I2C bus to use

Member Function Documentation

bool configAN3944

(

)

MPR121 destructor ~MPR121(); there is no need for the destructor Sets up a default configuration, based on Application Note 3944 (AN3944): http://cache.freescale.com/files/sensors/doc/app_note/AN3944.pdf

After configuration, the sensor is left in the run state.

Returns

True if configuration is successful

Here is the call graph for this function:

void readButtons

(

)

Reads button states in the m_buttonStates member variable. Also, sets the m_overCurrentFault variable if overcurrent is detected.

Here is the call graph for this function:

mraa::Result writeBytes	(	uint8_t	reg,
		uint8_t *	buffer,
		int	len
	)

Writes value(s) into registers

Parameters

reg	Register location to start writing into
buffer	Buffer for data storage
len	Number of bytes to write

Returns

mraa::Result

Here is the caller graph for this function:

int readBytes	(	uint8_t	reg,
		uint8_t *	buffer,
		int	len
	)

Reads value(s) from registers

Parameters

reg	Register location to start reading from
buffer	Buffer for data storage
len	Number of bytes to read

Here is the caller graph for this function:

Field Documentation

uint16_t m_buttonStates

Button states

bool m_overCurrentFault

Overcurrent detected

---

The documentation for this class was generated from the following files:

• /iotdk/jenkins/workspace/upm-doc-stable/src/mpr121/mpr121.h
• /iotdk/jenkins/workspace/upm-doc-stable/src/mpr121/mpr121.cxx