hp20x.h

/*
 * Author: Jon Trulson <jtrulson@ics.com>
 * Copyright (c) 2015 Intel Corporation.
 *
 * Permission is hereby granted, free of charge, to any person obtaining
 * a copy of this software and associated documentation files (the
 * "Software"), to deal in the Software without restriction, including
 * without limitation the rights to use, copy, modify, merge, publish,
 * distribute, sublicense, and/or sell copies of the Software, and to
 * permit persons to whom the Software is furnished to do so, subject to
 * the following conditions:
 *
 * The above copyright notice and this permission notice shall be
 * included in all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
 * LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
 * OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
 * WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
 */
#pragma once

#include <string>
#include <mraa/common.hpp>
#include <mraa/i2c.hpp>

#define HP20X_I2C_BUS 0
#define HP20X_DEFAULT_I2C_ADDR 0x76

namespace upm {
  
  class HP20X {
  public:

    typedef enum {
      CMD_SOFT_RST              = 0x06,

      CMD_ADC_CVT               = 0x40, // mask - ANDed with DSR and CHNL bits

      CMD_READ_PT               = 0x10, // read pressure/temp
      CMD_READ_AT               = 0x11, // read alt/temp

      CMD_READ_P                = 0x30, // read pressure only
      CMD_READ_A                = 0x31, // read alt only
      CMD_READ_T                = 0x32, // read temp only

      CMD_ANA_CAL               = 0x28, // recalibrate internal analog blocks

      CMD_READ_REG              = 0x80, // mask - ANDed with reg addr
      CMD_WRITE_REG             = 0xc0  // mask - ANDed with reg addr
    } HP20X_CMD_T;

    typedef enum {
      CHNL_PT                   = 0x00, // pressure and temperature
      CHNL_T                    = 0x02, // temperature

      CHNL_SHIFT                = 0 // don't use, indicates position in REG
    } CHNL_BITS_T;
    
    typedef enum {
      DSR_4096                  = 0x00, // decimation rate of digital filter
      DSR_2048                  = 0x01,
      DSR_1024                  = 0x02,
      DSR_512                   = 0x03,
      DSR_256                   = 0x04,
      DSR_128                   = 0x05,

      DSR_SHIFT                 = 2 // don't use, indicates position in REG
    } DSR_BITS_T;
    

    typedef enum {
      REG_ALT_OFF_LSB           = 0x00,
      REG_ALT_OFF_MSB           = 0x01,

      REG_PA_H_TH_LSB           = 0x02, // Pres/Alt high threshold
      REG_PA_H_TH_MSB           = 0x03,

      REG_PA_M_TH_LSB           = 0x04, // Pres/Alt medium threshold
      REG_PA_M_TH_MSB           = 0x05,

      REG_PA_L_TH_LSB           = 0x06, // Pres/Alt low threshold
      REG_PA_L_TH_MSB           = 0x07,

      REG_T_H_TH                = 0x08, // temperature high threshold
      REG_T_M_TH                = 0x09,
      REG_T_L_TH                = 0x0a,

      REG_INT_EN                = 0x0b, // interrupt enables
      REG_INT_CFG               = 0x0c, // interrupt configuration
      REG_INT_SRC               = 0x0d, // interrupt sources

      REG_PARA                  = 0x0e  // parameters config
    } HP20X_REG_T;
    
    typedef enum {
      INT_EN_T_WIN_EN           = 0x01,
      INT_EN_PA_WIN_EN          = 0x02,

      INT_EN_T_TRAV_EN          = 0x04,
      INT_EN_PA_TRAV_EN         = 0x08,

      INT_EN_T_RDY_EN           = 0x10,
      INT_EN_PA_RDY_EN          = 0x20
      // 0x40, 0x80 reserved
    } INT_EN_BITS_T;

    typedef enum {
      INT_CFG_T_WIN_CFG          = 0x01,
      INT_CFG_PA_WIN_CFG         = 0x02,

      INT_CFG_T_TRAV_CFG         = 0x04,
      INT_CFG_PA_TRAV_CFG        = 0x08,

      INT_CFG_T_RDY_CFG          = 0x10,
      INT_CFG_PA_RDY_CFG         = 0x20,

      INT_CFG_PA_MODE            = 0x40
      // 0x80 reserved
    } INT_CFG_BITS_T;

    typedef enum {
      INT_SRC_T_WIN              = 0x01,
      INT_SRC_PA_WIN             = 0x02,

      INT_SRC_T_TRAV             = 0x04,
      INT_SRC_PA_TRAV            = 0x08,

      INT_SRC_T_RDY              = 0x10,
      INT_SRC_PA_RDY             = 0x20,

      INT_SRC_DEV_RDY            = 0x40, // device is ready

      INT_SRC_TH_ERR             = 0x80 // threshold error
    } INT_SRC_BITS_T;

    typedef enum {
      // 0x01-0x40 reserved
      PARA_CMPS_EN               = 0x80 // compensation enable
    } PARA_BITS_T;

    HP20X(int bus=HP20X_I2C_BUS, uint8_t address=HP20X_DEFAULT_I2C_ADDR);

    ~HP20X();
    
    bool init(DSR_BITS_T dsr=DSR_4096);

    bool writeCmd(uint8_t cmd);

    bool writeReg(HP20X_REG_T reg, uint8_t data);

    uint8_t readReg(HP20X_REG_T reg);

    int readData();

    bool isReady();

    bool waitforDeviceReady();

    float getTemperature();

    float getPressure();

    float getAltitude();

    void compensationEnable(bool enable);

    bool setInterruptEnable(uint8_t bits);

    bool setInterruptConfig(uint8_t bits);

    uint8_t getInterruptSource();

    void setDSR(DSR_BITS_T dsr);


    void recalibrateInternal();

    void softReset();

    void setAltitudeOffset(int16_t off);

    void setPAThreshholds(int16_t low, int16_t med, int16_t high);

    void setTemperatureThreshholds(int8_t low, int8_t med, int8_t high);


  protected:
    mraa::I2c m_i2c;

  private:
    uint8_t m_addr;
    uint8_t m_dsr;

  };
}