upm
1.7.1
Sensor/Actuator repository for libmraa (v2.0.0)
|
Go to the source code of this file.
Macros | |
#define | DTM_LE_CMD_RESET 0x00 |
DTM command codes (upper two bits in the DTM command), use a bitwise OR with the frequency N = 0x00 - 0x27: N = (F-2402)/2 Frequency Range 2402 MHz to 2480 MHz. More... | |
#define | DTM_LE_CMD_RECEIVER_TEST 0x40 |
#define | DTM_LE_CMD_TRANSMITTER_TEST 0x80 |
#define | DTM_LE_CMD_TEST_END 0xC0 |
#define | DTM_LE_PKT_PRBS9 0x00 |
Defined packet types for DTM. More... | |
#define | DTM_LE_PKT_0X0F 0x01 |
#define | DTM_LE_PKT_0X55 0x02 |
#define | DTM_LE_PKT_VENDOR 0x03 |
#define | LE_PACKET_REPORTING_EVENT_MSB_BIT 0x80 |
Defined bit fields for DTM responses. More... | |
#define | LE_TEST_STATUS_EVENT_LSB_BIT 0x01 |
#define | LE_TEST_STATUS_EVENT 0x00 |
DTM response types. More... | |
#define | LE_TEST_PACKET_REPORT_EVENT 0x80 |
#define | LE_TEST_STATUS_SUCCESS 0x00 |
DTM return values. More... | |
#define | LE_TEST_STATUS_FAILURE 0x01 |
#define DTM_LE_CMD_RESET 0x00 |
DTM reset command code
#define DTM_LE_CMD_RECEIVER_TEST 0x40 |
DTM receiver test command code
#define DTM_LE_CMD_TRANSMITTER_TEST 0x80 |
DTM transmitter test command code
#define DTM_LE_CMD_TEST_END 0xC0 |
DTM test end command code
#define DTM_LE_PKT_PRBS9 0x00 |
Bit pattern PRBS9.
#define DTM_LE_PKT_0X0F 0x01 |
Bit pattern 11110000 (LSB is the leftmost bit).
#define DTM_LE_PKT_0X55 0x02 |
Bit pattern 10101010 (LSB is the leftmost bit).
#define DTM_LE_PKT_VENDOR 0x03 |
Vendor specific. Nordic: continous carrier test
#define LE_PACKET_REPORTING_EVENT_MSB_BIT 0x80 |
Bit field for most significant bit
#define LE_TEST_STATUS_EVENT_LSB_BIT 0x01 |
Bit field for least significant bit
#define LE_TEST_STATUS_EVENT 0x00 |
DTM event response
#define LE_TEST_PACKET_REPORT_EVENT 0x80 |
DTM packet report reponse
#define LE_TEST_STATUS_SUCCESS 0x00 |
DTM success return value
#define LE_TEST_STATUS_FAILURE 0x01 |
DTM failure return value