upm
1.7.1
Sensor/Actuator repository for libmraa (v2.0.0)
|
Defines register values for a set of modem configuration registers. More...
Defines register values for a set of modem configuration registers that can be passed to setModemConfig() if none of the choices in ModemConfigChoice suit your need setModemConfig() writes the register values to the appropriate RF22 registers to set the desired modulation type, data rate and deviation/bandwidth. Suitable values for these registers can be computed using the register calculator at http://www.hoperf.com/upload/rf/RF22B%2023B%2031B%2042B%2043B%20Register%20Settings_RevB1-v5.xls
Data Fields | |
uint8_t | reg_1c |
Value for register RF22_REG_1C_IF_FILTER_BANDWIDTH. | |
uint8_t | reg_1f |
Value for register RF22_REG_1F_CLOCK_RECOVERY_GEARSHIFT_OVERRIDE. | |
uint8_t | reg_20 |
Value for register RF22_REG_20_CLOCK_RECOVERY_OVERSAMPLING_RATE. | |
uint8_t | reg_21 |
Value for register RF22_REG_21_CLOCK_RECOVERY_OFFSET2. | |
uint8_t | reg_22 |
Value for register RF22_REG_22_CLOCK_RECOVERY_OFFSET1. | |
uint8_t | reg_23 |
Value for register RF22_REG_23_CLOCK_RECOVERY_OFFSET0. | |
uint8_t | reg_24 |
Value for register RF22_REG_24_CLOCK_RECOVERY_TIMING_LOOP_GAIN1. | |
uint8_t | reg_25 |
Value for register RF22_REG_25_CLOCK_RECOVERY_TIMING_LOOP_GAIN0. | |
uint8_t | reg_2c |
Value for register RF22_REG_2C_OOK_COUNTER_VALUE_1. | |
uint8_t | reg_2d |
Value for register RF22_REG_2D_OOK_COUNTER_VALUE_2. | |
uint8_t | reg_2e |
Value for register RF22_REG_2E_SLICER_PEAK_HOLD. | |
uint8_t | reg_58 |
Value for register RF22_REG_58_CHARGE_PUMP_CURRENT_TRIMMING. | |
uint8_t | reg_69 |
Value for register RF22_REG_69_AGC_OVERRIDE1. | |
uint8_t | reg_6e |
Value for register RF22_REG_6E_TX_DATA_RATE1. | |
uint8_t | reg_6f |
Value for register RF22_REG_6F_TX_DATA_RATE0. | |
uint8_t | reg_70 |
Value for register RF22_REG_70_MODULATION_CONTROL1. | |
uint8_t | reg_71 |
Value for register RF22_REG_71_MODULATION_CONTROL2. | |
uint8_t | reg_72 |
Value for register RF22_REG_72_FREQUENCY_DEVIATION. | |